• Driver Manual (Supplement to the FieldServer Instruction Manual) FS-8700-48 Fike Cheetah APPLICABILITY & EFFECTIVITY Effective for all systems manufactured after September 2011 A Sierra Monitor Company Driver Version: Document Revision. • FS-8700-48 Fike Cheetah Manual TABLE OF CONTENTS Cheetah Device Description. 5 Driver Scope of Supply.

5 Supplied by FieldServer Technologies for this driver. 5 Provided by Supplier of 3 Party Equipment. 5 Hardware Connections. 6 Connection to Fike Cheetah Panel. 6 RS-485 Connection to Fike Cheetah Xi Panel. • FS-8700-48 Fike Cheetah Manual Appendix B.1.3. Message 1.1 - Newer Firmware.

Fike’s Cheetah Xi (P/N 10-068). Response times as little as one-quarter second between manual pull station and notification appliance.

25 Appendix B.2. Fike XI Panel Limitations and capabilities. download Honda Gcv160 Service Repair Shop Manual torrent. 25 Appendix C. 26 Appendix C.1. Driver Error Messages. 26 Appendix C.2. download Fanuc Robot Pmc Manual. Driver Stats.

28 Appendix C.3. • FS-8700-48 Fike Cheetah Manual CHEETAH DEVICE DESCRIPTION The Cheetah Protocol driver allows the FieldServer to transfer data to and from devices over either RS-232 or RS- 485 using the Cheetah device protocols (Legacy Cheetah Classic and the current Cheetah Xi). The driver supports messages sent from the Cybercat panel. • FS-8700-48 Fike Cheetah Manual HARDWARE CONNECTIONS The FieldServer is connected to the Cheetah panel's Peripheral Port (see below). This port is either a serial port (identified as jack 4) or RS-485 port (use the terminals adjacent to jack 4).

Configure the Cheetah Panel according to manufacturer’s instructions Connection to Fike Cheetah P anel FIKE CHEETAH CONNECTOR. • FS-8700-48 Fike Cheetah Manual RS-485 Connection to Fike Cheetah X i Panel SHIELD No Connection FieldServer SHIELD DACT Part of Cheetah XI panel For FieldServer RJ45 Ports Use RJ45 Pin1 for + Use RJ45 Pin8 for - FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com To other Devices Connect. • FS-8700-48 Fike Cheetah Manual RS-232 Connection to Fike Cheetah X i Panel FieldServer 3.3.1 Connection Notes:  Communication on the RS-232 port is untested.  We recommend that a RS-232 optical isolator is used on the connection between the FieldServer and the Cheetah XI panel to isolate any potential ground differential issues. • FS-8700-48 Fike Cheetah Manual Connecting the FieldServer to the MIM (Multi -Interface Module)  The RS-232 port of the FieldServer connects to the P5 (RJ11) RS-232 port of the MIM board. 3.4.1 Connection Notes  The Peripherals menu of the Fike Panel needs to be updated: . Bizhub C25 Manual download there. • FS-8700-48 Fike Cheetah Manual DATA ARRAY PARAMETERS Data Arrays are “protocol neutral” data buffers for storage of data to be passed between protocols.